If you’re using a roller, which can splatter, consider using a paint shield or guard. This tool is a barrier, preventing paint from touching surfaces you want to protect. Due to this, you will need to identify where the screws are and dig out the filler to unscrew them. Water damage –In the unfortunate event that a room has suffered from a leak and there is water damage to the wall or floor, it’s likely skirting boards will need to be removed to conduct repairs. This will especially be the case if changes need to be made to plumbing outlets or electrical systems that are located behind skirting boards in the wall.

Chipped wood, loose nails and general dirt can easily accumulate in a simple job like this. Once you've finished, clean the area and make sure there are no hazards left behind! A heat gun is a tool that emits a stream of hot air, typically between 100°C and 550°C. This hot air softens the paint on wood surfaces, making it easier to scrape off. Materials and Tools Required: Yes! Removing old skirting boards without causing damage to their surroundings is relatively straightforward when you know how to get skirting boards off. Updating boards –Sometimes, the motivation behind removing skirting boards will be as simple as just wanting a change. Perhaps you want to embrace a new style or material, or maybe the existing boards have become worn, faded or outdated. Whatever the case, you’ll always need to remove existing boards before installing the new ones. It has a good oscillation speed that can smooth all the rough edges and surfaces. You can adjust its variable speed from 7,000 RPM to 12000 RPM according to your needs. Moreover, you can use this tool comfortably. It comes with a compact handle for a better palm grip.You have to take your time to consider the size of an electric sander. It determines how comfortable and easy it would be to handle this tool. If you are going to work in tighter spaces, a compact electric sander will be the best. You can call a professional tradesperson if you’re not an experienced DIYer or worried about damaging the wall or surrounding cables and pipes. Can you reuse skirting boards?

Health Precaution: The fumes produced from the heated paint can be toxic. Always work in a space with good ventilation. Consider using a mask for an added layer of protection. The obvious problem here, is accessing the fixings once the boards are fixed in place. Once this happens, the screw holes are filled and then they are painted over. Radiator pipes often run across the skirting boards, especially in older properties. Rather than working around the pipes, it’s easier to ask a professional plumber to remove your radiators until your skirting boards have been replaced. Detailed Cleaning: An old toothbrush can be quite handy for nooks and hard-to-reach corners. But remember, it might not be as effective as a steel wool pad.Its dust filter bag makes sure that there is only a minimum amount of airborne dust. It keeps your workspace mess-free. Style is subjective and if you don't like the current skirting boards you can take a look at skirting board ideas to fit in with the aesthetic you are trying to create. This might include more ornate skirting with an intricate style, or perhaps something a little more contemporary.

Better speed will also save you a lot of time. Many electric sanders are now available with adjustable speed. It gives you better control over your tasks. Dust CollectionYou can also adjust its speed with ease. It can go from 210 – 440 meters in a minute. You can choose a higher speed if you want to ensure fast-paced work. When laying down laminate flooring, it's not always essential to remove skirting boards. However, it can depend on what type of flooring is currently down and how your house was built. The first step for removing a skirting board is to make sure you have all your tools at hand. Then, make sure all cables or attachments connected to the skirting board are removed. You’ll be using force and sharp tools to take the board off the wall, which can cause electrical damage if wires and cables are not removed beforehand. You'll also want to put aside any objects around the area, and cover the floor with an old piece of fabric or a soft plastic sheet to prevent any damage. Such features remove all the airborne dust that rises while sanding. You do not have to pause to clear it up frequently. It saves you a lot of time and effort as well. Vibration