Calibrate the throttle by depressing the throttle fully, releasing it to ~5% activation, and selecting Done while the control is still sightly activated: Thrustmaster TSS Handbrake Sparco Mod+ is fully compatible with Thrustmaster TX and TS-XW racing wheels on Xbox One. Alternatively, you can use the Fanatec or Aiologs handbrake with the help of DriveHub accesorry on Xbox One. The latter is a much cheaper and better option in my opinion. Handbrake for Thrustmaster TMX, TMX Pro and Ferrari 458 Spider on Xbox One If you are not sure which type of pedals you have, please consult with the manufacturer. Most pedals that are not advertised explicitly as load cell pedals use potentiometers.

G29 and G920 racing - Logitech Support Program buttons on the G29 and G920 racing - Logitech Support

With the Logitech G29, you get a pedal set including a clutch. With most budget wheels, the pedals don't contain a clutch -- just a throttle and brake attached to the base. For all Fanatec wheels, the Fanatec ClubSport Handbrake V1.5 works perfectly on PS4 when connected to Fanatec wheelbase/pedals with the included cable. Alternatively, you can use other handbrakes like Thrustmaster TSS or Aiologs handbrake with the help of DriveHub. If the following steps do not solve your calibration issues, please try recalibrating your controls. From the Profiles area at the top-right corner of the LGS window, navigate to the profile for which you wish to reset all button assignments.Although Logitech does not make a handbrake for their racing wheels, you can use any of the three USB handbrakes – Fanatec ClubSport, Thrustmaster TSS or Aiologs handbrake with the DriveHub to make them work with Logitech G920 on Xbox One. Handbrake for Thrustmaster TX and TS-XW on Xbox One LED Light – A light lies inside the case which can be seen through the transparent window. It can be customised using the Aiologs software.

Logitech G29 Driving Force Steering Wheels - AU Logitech G29 Driving Force Steering Wheels - AU

Once this setting is enabled, you should see a display labelled "F" whenever you are driving. The value of the display corresponds to the wheel force currently demanded by the sim and will increase with speed, steering angle, and bumps. If the display reads full and is colored orange instead of green, as pictured below, then the steering force is at its maximum and any additional forces will not be communicated through the steering wheel. Ideally, to prevent clipping, the Strength setting should be set so that the F bar is never at full force under normal driving circumstances, it is okay if the bar fills up when going over larger bumps and curbs. There are many steering wheels and pedals on the market, but the overall value you get with the Logitech G29 makes it worth the price. Alternatives to consider To change your Primary controller, open the start menu, type "controller" and select the search result: For Fanatec wheels, open the "Fanatec Wheel Properties" application, or go to the Game Controllers panel in Windows and selecting Properties for your wheel:If you prefer to not use the auto function, iRacing includes a steering force meter that can be enabled under Options->Option: This is almost always due to improper controller ID setup. Controls are reset whenever the ID of a controller changes. Windows will not save the controller ID unless the controller is set as the Primary controller. If you find that your virtual wheel is out of sync with your physical wheel at higher steering angles, turn the wheel 360 degrees to either direction so that it has completed a full rotation, then adjust the map range until the virtual wheel is pointing straight ahead. For all Thrustmaster racing wheels, you can use any USB handbrake like the Fanatec ClubSport, Thrustmaster TSS or Aiologs handbrake by connecting it to the USB port on PC. Handbrake for Fanatec Racing Wheels on PC Adjustable lever – The handbrake lever can be adjusted by 90° for vertical or horizontal mode. The lever height can also be adjusted to your liking.